PPCS Smart WIFI RGB LED Controller - Wireless for iPhone ,Android or IOS 4A*3CH, DC12-24V
PPCS NEW WIFI-V01 controller appeared with the installation of controlling software on mobile devices with Android or IOS system, it can remote control LED lighting products through WiFi, which makes LED control more intelligent and humanization. One WIFI-V01 controller can be used as dimmer, CT controller, and RGB controller, only need to select the right control interface in the software.
Frequently Bought Together
PPCS NEW WIFI-V01 controller appeared with the installation of controlling software on mobile devices with Android or IOS system, it can remote control LED lighting products through WiFi, which makes LED control more intelligent and humanization. One WIFI-V01 controller can be used as dimmer, CT controller, and RGB controller, only need to select the right control interface in the software. In addition, this model has DIY function. Users can get any effect they want based on our controlling software. If you don't have any mobile devices with the controlling software at hand, you could also use our RF remote control to control it. This model designed for constant voltage led products, such as led strip, led modules. For controlling more led products, amplifier is available.
- Support both wifi control of Apple products (iPod, iPad, iPhone), Android mobile devices like Samsung, HTC, and RF wireless remote control.
- With the 3-in-1(Dimming, CT, RGB) apple/android software. One device suit to different lighting application scene.
- Memory function to save scenes anytime anywhere for next play.
- WIFI-V01 is designed for constant voltage led products, working voltage auto fit to DC12-24V.
- Wifi control based on 2.4GHZ frequency, RF remote control based on 433.92MH
CH2~WW CH1~WC V+~COM
CT control interface:
No. |
Button |
Function |
1 |
DIY mode saving key |
After DIY, click this key to save. Saving the DIY mode in anytime |
2 |
ON/OFF |
Turn on/off WIFI-V01 |
3 |
Color value |
Display the R/G/B gray value, “L”: the current brightness level. |
4 |
Color board |
Select any static color mode from the board. |
5 |
Brightness slip |
Slip to adjust the current light brightness, 100 levels in total. |
6 |
System setting |
Click to system setting page, set the WIFI connection and select the application scene (Dimming, CT, RGB). |
7 |
DIY memory function |
Go to DIY modes select page. Display all of the DIY modes. |
8 |
Dynamic modes |
Go to select the dynamic modes. |
9 |
Current application show |
Display the current application scene. |
Dynamic modes control interface:
- MODE: select the different dynamic mode, such as flash, fade and etc;
- SPEED: select the speed level of the dynamic mode,100 levels in total;
- EFFECT: select the different effect based on the different mode
DIY modes manage interface:
System Setting interface:
- System Settings:wifi connection Setting;
- Product Attributes Settings:Type Setting (RGB/CT/DIM)
Indicator light |
Function table |
Power |
Power indicator light, long-time bright shows power supply is working normally |
Wifi |
Long-time bright in normally connection, when receives wifi signal data flicker. |
RF |
Flickering when receives correct control signal from wifi device or RF remote control; and die out in free time. |
RESET key:Press and hold at least 5 seconds, WIFI previously set data will be cleared to return to the factory default
CT connection:
CT full touch remote control:
Function of each button as below:
Name of key |
Instruction |
Remarks |
ON |
Turn on the device in any time |
|
OFF |
Turn off the device in anytime |
|
Mode |
The mode will move to next, when touch the key each time |
9 modes in total. |
Speed/Brightness + |
The Speed/Brightness will +1, when touch the key each time |
Speed for dynamic modes, Brightness for static modes. |
Speed/Brightness - |
The Speed/Brightness will -1, when touch the key each time |
Speed for dynamic modes, Brightness for static modes. |
Color Ring |
Touch any color temperature which is wanted. |
|
Modes as below:
NO |
Patterns |
Remarks |
1 |
Static warm white and cool white |
Brightness is adjustable, speed is unadjustable |
2 |
Warm white and cool white flash |
Speed is adjustable, brightness is unadjustable |
3 |
Warm white and cool white fade |
|
4 |
Warm to cool flash |
|
5 |
Warm to cool fade |
|
6 |
Static warm white, cool white flash |
|
7 |
Static warm white, cool white fade |
|
8 |
Static coo white, warm white flash |
|
9 |
Static coo white, warm white fade |
- Item Type: RGB Controler
- Model Number: WF-V01
- Warranty: 1 Year
- Button Number: 5
- Applicable Lights: LED strip
- Certification: CE,RoHS
- Power Source: DC
- Max. Load Power: 288
- Connection Mode: Common anode
- Controled Method: RF remote
- Customized: Yes
- Voltage: 12V
- Remote Distance: 20
- Wattage: 144
- Features: Wifi controller
- Oscillation frequency: 433
- Color: Black
- Material: Aluminum
Controller:
Working temperature |
-20-60degree |
Working voltage |
DC12~24V |
Power consumption |
<3W |
Connect method |
Common anode |
WIFI brightness level |
100 |
WIFI speed level |
100 |
Remote control brightness level |
32 |
Remote control speed level |
100 |
N.W. |
150g |
G.W. |
230g |
Case dimension |
L108*W63*H28mm |
Box dimension |
L109*W55*H56mm |
Output |
3 channels |
Output current |
≤4A(each channel) |
WIFI frequency |
2.4G |
RF remote control frequency |
433.92Mhz |
Output gray scale |
256 |
Memory function |
support |
Receiving sensitivity |
802.11b:DSSS(-5dBm) 802.11b:CCK(-10dBm) 802.11g:OFDM(-15dBm) |
||
Output power |
12V: ≤144W 24V: ≤288W |
Working temperature |
-20-60degree |
Power supply |
AAA*3 |
Standby current |
7uA |
Working voltage |
1.5V*3 |
Working current |
10mA |
Remote control distance |
Up to 30m |
RF frequency |
433.92Mhz |
Power consumption |
0.04mW |
Software
Name |
FreeColor V1.0 |
Platform |
Android 2.1 or above, IOS4.3 or above, with the wifi function |
Size |
Android(661KB) , IOS(Being certified in) |
||
Category |
Communication |
Language |
English |
Package:
- 1* Wifi controller
- 1*5 key remote controller
- 1*instruction manual