The proven design of the Alphacool Laing top meets the future: Extreme highflow with 3/8” connection threads
This top replaces the black standard cover of the Laing DDC-1T and Laing DDC-1Plus pumps and adds many additional and very useful features. One of the most important is the use of 3/8” threads which makes you independent of the barbs on the original cover. The use of 3/8” threads, which have a much larger inner diameter than the common 1/4” threads on Laing covers, also makes this cover the ultimate choice for highflow applications.
Rebuilding of the pump to use this cover is easy: Simply remove the 4 screws at the bottom of the pump and lift off the original cover. Then insert the 4 included screws instead of the original ones and put the cover on top of the pump. Simply tighten the screws and you are set to go!
To ensure a safe seal of the cover simply leave the original O-ring gasket in its place during installation.
Optionally this cover also offers the possibility for decoupled installation of the pump in a 3,5” drive bay. For use of this feature only one of our decoupling kits (Prod..No.: 13701) is required to allow quick, compact and decoupled installation of the pump.
This cover is also the basis for installation of a reservoir on this pump. The optional reservoir, available at the product number 13905, can simply be screwed onto the cover and the coling loop comes to life!
Technical specifications:
- Dimensions (LxWxH): 80 x 80 x 20

- Material: Röhm Plexiglas GS
- Connection thread size: 2x 3/8”
- Side mounting threads: 4x M4


Extent of delivery: 

- 1x Plexi top HF 38

- 4x Stainless steel screw M4x25mm

- 1x Screw plug G3/8“

- 1x Allen key 2.5mm
Note regarding mounting: After mounting a small gap remains between pump and top. The fit is tight as the O-ring ensures a safe seal. Hence do not over-tighten the screws, as it may result in damages to the top.